It is recommended for use as a Class C RF amplifier or oscillator, a Class AB RF linear amplifier or a Class AB push-pull AF amplifier or modulator. The 4CV50,000E is also useful as a plate and screen modulated Class C RF amplifier.
| GENERAL DESCRIPTION |
|
The 4CV50,000E is characterized by low input and feedback capacitances and low internal lead inductances. A rugged mesh thoriated tungsten filament provides adequate emission over the long operating life. It is recommended for use as a Class C RF amplifier or oscillator, a Class AB RF linear amplifier or a Class AB push-pull AF amplifier or modulator. The 4CV50,000E is also useful as a plate and screen modulated Class C RF amplifier. |
| TECHNICAL SPECIFICATIONS | |
| Plate Dissipation (Max.) | 50,000 watts |
| Screen Dissipation (Max.) | 1,500 watts |
| Grid Dissipation (Max.) | 400 watts |
| Frequency for Max. Ratings (CW) | 110 MHz |
| Cooling | Vapor and Forced Air |
| Filament Voltage Current |
Thoriated Tungsten Mesh 12.0 volts 215 amperes |
| Capacitances (Grounded Cath. Connection) Input Output Feed-through |
310.0 pF 52.0 pF 0.7 pF |
| Amplification Factor (g1-g2) | 4.5 |
| Base | Special |
| Recommended Air-System Socket | SK-2011A |
| Recommended Boiler | BR-710A |
| Maximum Seal & Envelope Temperature | 250°C |
| Maximum Length (less Boiler) | 11.50 in; 292.10 mm |
| Maximum Diameter (less Boiler) | 9.53 in; 242.00 mm |
| Weight (approximate) (less Boiler) | 31.5 lb; 14.3 kg |
| Operating Position | Vertical, base down |
| Specifications may change without notice | |
| THIS TUBE IS USED IN THE FOLLOWING SHORTWAVE BROADCAST TRANSMITTERS | ||
| Manufacturer | Transmitter specifications | Power in kW |
| Harris | SW-50 | 50 |
| SW-50 A | 50 | |
| SW-100 | 100 | |
| NEC Corporation | HFB-7847 | 50 |
| THIS TUBE IS AVAILABLE FROM | ||
| Manufacturer | Rebuilder | Distributor |
| Eimac | Richardson Electronics | |
| PRICE LEVEL (US$) | |||||
| 1 | 2 | 3 | 4 | 5 | 6 |
| 0 - 10 | 10 - 100 | 100 - 1000 | 1000 - 10,000 | 10,000 - 50,000 | 50,000 - 100,000 |