GENERAL DESCRIPTION |
The 4CX1500A is a general purpose tetrode for use up to and through VHF. Insulation is ceramic and the thoriated tungsten filament is a rugged mesh design. The screen terminal is a continuous ring which allows good isolation between the plate circuit and the control grid circuit. The 4CX1500A is recommended for use as a Class C power amplifier, Class B or Class AB, linear amplifier as a regulator, and in pulse modulator service. |
TECHNICAL SPECIFICATIONS | |
Plate Dissipation (Max.) | 1500 watts |
Screen Dissipation (Max.) | 75 watts |
Grid Dissipation (Max.) | 25 watts |
Frequency for Max. Ratings (CW) | 150 MHz |
Cooling | Forced Air |
Filament Voltage Current |
Thoriated Tungsten Mesh 5.0 volts 38.5 amperes |
Capacitances (Grounded Cath. Connection) Input Output Feed-through |
78.0 pF 10.5 pF 0.25 pF |
Amplification Factor (g1-g2) | 5.5 |
Transconductance | 26,000 µmhos |
Base | Special, Breechblock |
Recommended Air-System Socket | SK-831 |
Recommended Air Chimney | SK-806 |
Maximum Seal & Anode Core Temperature | 250°C |
Maximum Length | 4.90 in; 124.50 mm |
Maximum Diameter | 3.37 in; 85.60 mm |
Weight (approximate) | 36 oz; 850 gm |
Operating Position | Vertical |
Specifications may change without notice |
THIS TUBE IS USED IN THE FOLLOWING SHORTWAVE BROADCAST TRANSMITTERS | ||
Manufacturer | Transmitter specifications | Power in kW |
Elcor | SW-5 K | 5 |
SW-40 K | 40 | |
SW-50 K | 50 | |
SW-100 K | 100 | |
Harris | SW-50 | 50 |
SW-50 A | 50 | |
SW-50 B | 50 | |
SW-100 | 100 | |
SW-100 A | 100 | |
SW-100 B | 100 | |
NEC Corporation | HFB-7847 | 50 |
THIS TUBE IS AVAILABLE FROM | ||
Manufacturer | Rebuilder | Distributor |
Eimac | Econco | Richardson Electronics |
Penta Laboratories | ||
PRICE LEVEL (US$) | |||||
1 | 2 | 3 | 4 | 5 | 6 |
0 - 10 | 10 - 100 | 100 - 1000 | 1000 - 10,000 | 10,000 - 50,000 | 50,000 - 100,000 |